Changes between Version 2 and Version 3 of TracRepositoryAdmin


Ignore:
Timestamp:
10/25/2021 04:13:30 PM (2 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • TracRepositoryAdmin

    v2 v3  
    1 = Repository Administration =
     1= Repository Administration
    22[[PageOutline(2-3)]]
    33
    4 == Quick start == #QuickStart
    5 
    6  * Manage repositories in the "Repository" admin panel, with `trac-admin` or in the `[repositories]` section of [wiki:TracIni#repositories-section trac.ini].
    7  * Set up a call to `trac-admin $ENV changeset added $REPO $REV` in the post-commit hook of each repository. Additionally, add a call to `trac-admin $ENV changeset modified $REPO $REV` in the post-revprop-change hook of repositories allowing revision property changes.
    8  * Set the `[trac] repository_sync_per_request` option to an empty value to disable per-request syncing.
    9  * Make sure the user under which your Subversion hooks are run has write access to the Trac environment, or use a tool like `sudo` to temporarily elevate privileges.
    10 
    11 == Specifying repositories == #Repositories
    12 Starting with 0.12, Trac can handle more than one repository per environment. The pre-0.12 way of specifying the repository with the `repository_dir` and `repository_type` options in the `[trac]` section of [wiki:TracIni trac.ini] is still supported, but two new mechanisms allow including additional repositories into an environment.
    13 
    14 It is also possible to define aliases of repositories, that act as "pointers" to real repositories. This can be useful when renaming a repository, to avoid breaking all the links to the old name.
    15 
    16 A number of attributes can be associated with each repository, which define the repository's location, type, name and how it is displayed in the source browser. The following attributes are supported:
     4== Quick start #QuickStart
     5
     6 * Enable the repository connector(s) for the version control system(s) that you will use.
     7 * Add repositories through the //Repositories// admin page, using `trac-admin` or by editing the `[repositories]` section of [[wiki:TracIni#repositories-section|trac.ini]].
     8 * Synchronize the repositories with the cache, if using cached repositories.
     9 * Configure your repository hooks to synchronize the repository. Alternatively you can synchronize on every request or disable the use of cached repositories, both of which have performance drawbacks and reduced functionality, but are easier to configure.
     10
     11== Enabling the components
     12
     13Support for version control systems is provided by optional components distributed with Trac, which are disabled by default //(since 1.0)//. Subversion and Git must be explicitly enabled if you wish to use them.
     14
     15The version control systems can be enabled by adding the following to the `[components]` section of your [TracIni#components-section trac.ini], or enabling the components through the //Plugins// admin page.
     16
     17{{{#!ini
     18tracopt.versioncontrol.svn.* = enabled
     19}}}
     20
     21{{{#!ini
     22tracopt.versioncontrol.git.* = enabled
     23}}}
     24
     25== Specifying repositories #Repositories
     26
     27Trac supports multiple repositories per environment, and the repositories may be for different version control systems. Each repository must be defined in a repository configuration provider. Repository providers included with Trac are the [#ReposDatabase database store], the [#ReposTracIni trac.ini configuration file] and the [#ReposGitWeb GitWeb configuration file]. Additional providers are available as plugins.
     28
     29You can define your repositories through a mix of providers, but each repository should only be defined in a single provider. The repository names must be unique across all providers and duplicate names are discarded.
     30
     31It is possible to define aliases of repositories that act as "pointers" to real repositories. This can be useful when renaming a repository, to avoid breaking links to the old name.
     32
     33=== Default Repository
     34
     35Trac's repositories are listed in the Repository Index when navigating to //Browse Source//. The default repository is displayed first, followed by the Repository Index. TracLinks without a repository name in the path specification (e.g. `[1]` rather than `[1/repos1]`) refer to the default repository. !TracLinks for repositories other than the default must include the repository name in the path specification.
     36
     37From the Repository Admin page, the default repository is specified by leaving the //Name// attribute empty. From the command line, the default repository is specified using the string `(default)` or `""`. In TracIni, the default repository is specified by leaving the `{name}` empty for each `{name}.{attribute}` option (e.g. `.dir = /path/to/dir`).
     38
     39=== Repository Attributes
     40
     41There are a number of attributes that can be specified for each repository, and additional attributes may be available through plugins. A repository `name` and one of the `alias` or `dir` attributes are mandatory. All others are optional.
     42
     43The following attributes are supported:
    1744
    1845||='''Attribute''' =||='''Description''' =||
    1946||`alias` ||\
    20 ||A repository having an `alias` attribute is an alias to a real repository. All TracLinks referencing the alias resolve to the aliased repository. Note that multiple indirection is not supported, so an alias must always point to a real repository. The `alias` and `dir` attributes are mutually exclusive. ||
     47||Defines an alias to a real repository. All TracLinks referencing the alias resolve to the aliased repository. Note that multiple indirection is not supported, so an alias must always point to a real repository. The `alias` and `dir` attributes are mutually exclusive. ||
     48|| `cached` ||\
     49|| For a version control system that support caching, specifies that repository caching should be used. Defaults to `true` for version control systems that support caching. ||
    2150||`description` ||\
    2251||The text specified in the `description` attribute is displayed below the top-level entry for the repository in the source browser. It supports WikiFormatting. ||
    2352||`dir` ||\
    24 ||The `dir` attribute specifies the location of the repository in the filesystem. It corresponds to the value previously specified in the option `[trac] repository_dir`. The `alias` and `dir` attributes are mutually exclusive. ||
    25 ||`hidden` ||When set to `true`, the repository is hidden from the repository index page in the source browser. Browsing the repository is still possible, and links referencing the repository remain valid. ||
    26 ||`type` ||The `type` attribute sets the type of version control system used by the repository. Trac supports Subversion and Git out-of-the-box, and plugins add support for many other systems. If `type` is not specified, it defaults to the value of the `[trac] repository_type` option. ||
    27 ||`url` ||The `url` attribute specifies the root URL to be used for checking out from the repository. When specified, a "Repository URL" link is added to the context navigation links in the source browser, that can be copied into the tool used for creating the working copy. ||
    28 
    29 A repository `name` and one of `alias` or `dir` attributes are mandatory. All others are optional.
    30 
    31 After adding a repository, the cache for that repository must be re-synchronized once with the `trac-admin $ENV repository resync` command.
    32 
    33  `repository resync <repos>`::
    34    Re-synchronize Trac with a repository.
    35 
    36 
    37 === In `trac.ini` === #ReposTracIni
     53||The `dir` attribute specifies the location of the repository in the filesystem. The `alias` and `dir` attributes are mutually exclusive. ||
     54||`hidden` ||\
     55|| When set to `true`, the repository is hidden from the repository index page in the source browser. Browsing the repository is still possible, and links referencing the repository remain valid. ||
     56||`sync_per_request`||\
     57|| When set to `true` the repository will be synchronized on every request (implicit synchronization). This is generally not recommended. See [#Synchronization repository synchronization] for a comparison of explicit and implicit synchronization. The attribute defaults to `false`. ||
     58||`type` ||\
     59|| The `type` attribute specifies the version control system used by the repository. Trac provides support for Subversion and Git, and plugins add support for several other systems. If `type` is not specified, it defaults to the value of the `[versioncontrol]` [wiki:TracIni#versioncontrol-default_repository_type-option default_repository_type] option. ||
     60||`url` ||\
     61|| The `url` attribute specifies the root URL to be used for checking out from the repository. When specified, a "Repository URL" link is added to the context navigation links in the source browser, that can be copied into the tool used for creating the working copy. ||
     62
     63=== Scoped Repository
     64
     65For some version control systems, it is possible to specify not only the path to the repository in the `dir` attribute, but also a ''scope'' within the repository. Trac will then only show information related to the files and changesets below that scope. The scope is specified by appending a path that is relative to the repository root. The Subversion backend for Trac supports this.
     66
     67For example, assume a repository at filesystem path `/var/svn/repos1` with several directories at the root of the repository: `/proj1`, `/proj2`, etc. The following configuration would scope the repository to `/proj1`:
     68{{{#!ini
     69proj1.dir = /var/svn/repos1/proj1
     70proj1.type = svn
     71}}}
     72
     73For other repository types, check the corresponding plugin's documentation.
     74
     75=== In the database #ReposDatabase
     76Repositories can also be specified in the database, using either the //Repositories// admin page under //Version Control//, or the `trac-admin $ENV repository` commands.
     77
     78The admin panel shows the list of all repositories defined in the Trac environment. It allows adding repositories and aliases, editing repository attributes and removing repositories. Note that repositories defined in `trac.ini` are displayed but cannot be edited.
     79
     80The following [wiki:TracAdmin trac-admin] commands can be used to perform repository operations from the command line.
     81
     82 `repository add <repos> <dir> [type]`::
     83   Add a repository `<repos>` located at `<dir>`, and optionally specify its type.
     84
     85 `repository alias <name> <target>`::
     86   Create an alias `<name>` for the repository `<target>`.
     87
     88 `repository remove <repos>`::
     89   Remove the repository `<repos>`.
     90
     91 `repository set <repos> <key> <value>`::
     92   Set the attribute `<key>` to `<value>` for the repository `<repos>`.
     93
     94Note that the default repository has an empty name, so it will need to be quoted when running `trac-admin` from a shell. Alternatively, the name `(default)` can be used instead, for example when running `trac-admin` in interactive mode.
     95
     96=== In `trac.ini` #ReposTracIni
    3897Repositories and repository attributes can be specified in the `[repositories]` section of [wiki:TracIni#repositories-section trac.ini]. Every attribute consists of a key structured as `{name}.{attribute}` and the corresponding value separated with an equal sign (`=`). The name of the default repository is empty.
    3998
    40 The main advantage of specifying repositories in `trac.ini` is that they can be inherited from a global configuration (see the [wiki:TracIni#GlobalConfiguration global configuration] section of TracIni). One drawback is that, due to limitations in the `ConfigParser` class used to parse `trac.ini`, the repository name is always all-lowercase.
     99The main advantage of specifying repositories in `trac.ini` is that they can be inherited from a [wiki:TracIni#GlobalConfiguration global configuration]. Cached repositories defined in `trac.ini` at the time of [TracEnvironment#SourceCodeRepository environment initialization] will be automatically synchronized if the repository's connector is enabled. One drawback is that due to limitations in the `ConfigParser` class used to parse `trac.ini`, the repository name is always lowercase.
    41100
    42101The following example defines two Subversion repositories named `project` and `lib`, and an alias to `project` as the default repository. This is a typical use case where a Trac environment previously had a single repository (the `project` repository), and was converted to multiple repositories. The alias ensures that links predating the change continue to resolve to the `project` repository.
    43 {{{
    44 #!ini
     102{{{#!ini
    45103[repositories]
    46104project.dir = /var/repos/project
    … …  
    59117Note that `name.alias = target` makes `name` an alias for the `target` repo, not the other way around.
    60118
    61 === In the database === #ReposDatabase
    62 Repositories can also be specified in the database, using either the "Repositories" admin panel under "Version Control", or the `trac-admin $ENV repository` commands.
    63 
    64 The admin panel shows the list of all repositories defined in the Trac environment. It allows adding repositories and aliases, editing repository attributes and removing repositories. Note that repositories defined in `trac.ini` are displayed but cannot be edited.
    65 
    66 The following [wiki:TracAdmin trac-admin] commands can be used to perform repository operations from the command line.
    67 
    68  `repository add <repos> <dir> [type]`::
    69    Add a repository `<repos>` located at `<dir>`, and optionally specify its type.
    70 
    71  `repository alias <name> <target>`::
    72    Create an alias `<name>` for the repository `<target>`.
    73 
    74  `repository remove <repos>`::
    75    Remove the repository `<repos>`.
    76 
    77  `repository set <repos> <key> <value>`::
    78    Set the attribute `<key>` to `<value>` for the repository `<repos>`.
    79 
    80 Note that the default repository has an empty name, so it will likely need to be quoted when running `trac-admin` from a shell. Alternatively, the name "`(default)`" can be used instead, for example when running `trac-admin` in interactive mode.
    81 
    82 
    83 == Repository synchronization == #Synchronization
    84 Prior to 0.12, Trac synchronized its cache with the repository on every HTTP request. This approach is not very efficient and not practical anymore with multiple repositories. For this reason, explicit synchronization through post-commit hooks was added.
    85 
    86 There is also new functionality in the form of a repository listener extension point ''(IRepositoryChangeListener)'' that is triggered by the post-commit hook when a changeset is added or modified, and can be used by plugins to perform actions on commit.
    87 
    88 === Mercurial Repositories ===
    89 Please note that at the time of writing, no initial resynchronization or any hooks are necessary for Mercurial repositories - see [trac:#9485] for more information.
    90 
    91 === Explicit synchronization === #ExplicitSync
    92 This is the preferred method of repository synchronization. It requires setting the `[trac]  repository_sync_per_request` option in [wiki:TracIni#trac-section trac.ini] to an empty value, and adding a call to `trac-admin` in the post-commit hook of each repository. Additionally, if a repository allows changing revision metadata, a call to `trac-admin` must be added to the post-revprop-change hook as well.
     119=== In !GitWeb #ReposGitWeb
     120
     121[https://git-scm.com/book/en/v2/Git-on-the-Server-GitWeb GitWeb] is a CGI script that comes with Git for web-based visualization of repositories. Trac can read the gitweb-formatted `project.lists` file. The configuration is done through the `[gitweb-repositories]` section of [[TracIni#gitweb-repositories-section|trac.ini]].
     122
     123== Repository caching
     124
     125Caching improves the performance browsing the repository, viewing logs and viewing changesets. Cached repositories must be [#Synchronization synchronized], using either explicit or implicit synchronization. When searching changesets, only cached repositories are searched.
     126
     127Repositories that support caching are cached by default. The Subversion and Git backends support caching. The [trac:TracMercurial Mercurial plugin] does not yet support caching ([trac:#8417]). To disable caching, set the `cached` attribute to `false`.
     128
     129After adding a cached repository, the cache must be populated with the `trac-admin $ENV repository resync` command.
     130
     131 `repository resync <repos>`::
     132   Re-synchronize Trac with a repository.
     133
     134== Repository synchronization #Synchronization
     135
     136Either explicit or implicit synchronization can be used. Implicit synchronization is easier to configure, but may result in noticeably worse performance. The changeset added and modified events can't be triggered with implicit synchronization, so the [#Automaticchangesetreferencesintickets commit ticket updater] won't be available.
     137
     138=== Explicit synchronization #ExplicitSync
     139
     140This is the preferred method of repository synchronization. It requires adding a call to `trac-admin` in the `post-commit` hook of each repository. Additionally, if a repository allows changing revision metadata, a call to `trac-admin` must be added to the `post-revprop-change` hook as well.
    93141
    94142 `changeset added <repos> <rev> [...]`::
    … …  
    98146   Notify Trac that metadata on one or more changesets in a repository has been modified.
    99147
    100 The `<repos>` argument can be either a repository name (use "`(default)`" for the default repository) or the path to the repository.
    101 
    102 Note that you may have to set the environment variable PYTHON_EGG_CACHE to the same value as was used for the web server configuration before calling trac-admin, if you changed it from its default location. See [wiki:TracPlugins Trac Plugins] for more information.
     148The `<repos>` argument can be either a repository name (use `"(default)"` for the default repository) or the path to the repository.
     149
     150Note that you may have to set the environment variable `PYTHON_EGG_CACHE` to the same value as was used for the web server configuration before calling `trac-admin`, if you changed it from its default location. See [wiki:TracPlugins#Settinguptheplugincache TracPlugins] for more information.
     151
     152==== Subversion
     153
     154===== Using `trac-svn-hook`
     155
     156In a Unix environment, the simplest way to configure explicit synchronization is by using the [trac:source:branches/1.4-stable/contrib/trac-svn-hook contrib/trac-svn-hook] script. `trac-svn-hook` starts `trac-admin` asynchronously to avoid slowing the commit and log editing operations. The script comes with a number of safety checks and usage advice. Output is written to a log file with prefix `svn-hooks-` in the environment `log` directory, which can make configuration issues easier to debug.
     157
     158There's no equivalent `trac-svn-hook.bat` for Windows yet, but the script can be run by Cygwin's bash. The documentation header of `trac-svn-hook` contains a Cygwin configuration example.
     159
     160Follow the help in the documentation header of the script to configure `trac-svn-hook`. You'll need to minimally set the `TRAC_ENV` variable, and may also need to set `TRAC_PATH` and `TRAC_LD_LIBRARY_PATH` for a non-standard installation or a virtual environment.
     161
     162Configuring the hook environment variables is even easier in Subversion 1.8 and later using the [http://svnbook.red-bean.com/en/1.8/svn.reposadmin.create.html#svn.reposadmin.hooks.configuration hook script environment] configuration. Rather than directly editing `trac-svn-hook` to set the environment variables, or exporting them from the hook that invokes `trac-svn-hook`, they can be configured through the repository `conf/hooks-env` file.
     163
     164Here is an example, using a Python virtual environment at `/usr/local/venv`:
     165{{{#!ini
     166[default]
     167TRAC_ENV=/var/trac/project-1
     168TRAC_PATH=/usr/local/venv/bin
     169}}}
     170
     171===== Writing Your Own Hook Script
    103172
    104173The following examples are complete post-commit and post-revprop-change scripts for Subversion. They should be edited for the specific environment, marked executable (where applicable) and placed in the `hooks` directory of each repository. On Unix (`post-commit`):
    … …  
    108177/usr/bin/trac-admin /path/to/env changeset added "$1" "$2"
    109178}}}
    110 Note: Ubuntu doesn't seem to like /usr/bin/trac-admin, so just use:
    111 {{{#!sh
    112 #!/bin/sh
    113 export PYTHON_EGG_CACHE="/path/to/dir"
    114 trac-admin /path/to/env/ changeset added "$1" "$2"
    115 }}}
     179Adapt the path to the actual location of `trac-admin`.
    116180On Windows (`post-commit.cmd`):
    117 {{{#!application/x-dos-batch
     181{{{#!bat
    118182@C:\Python26\Scripts\trac-admin.exe C:\path\to\env changeset added "%1" "%2"
    119183}}}
    … …  
    126190}}}
    127191On Windows (`post-revprop-change.cmd`):
    128 {{{#!application/x-dos-batch
     192{{{#!bat
    129193@C:\Python26\Scripts\trac-admin.exe C:\path\to\env changeset modified "%1" "%2"
    130194}}}
    … …  
    132196The Unix variants above assume that the user running the Subversion commit has write access to the Trac environment, which is the case in the standard configuration where both the repository and Trac are served by the web server. If you access the repository through another means, for example `svn+ssh://`, you may have to run `trac-admin` with different privileges, for example by using `sudo`.
    133197
    134 Note that calling `trac-admin` in your Subversion hooks can slow down the commit and log editing operations on the client side. You might want to use the [trac:source:trunk/contrib/trac-svn-hook contrib/trac-svn-hook] script which starts `trac-admin` in an asynchronous way. The script also comes with a number of safety checks and usage advices which should make it easier to set up and test your hooks. There's no equivalent `trac-svn-hook.bat` for Windows yet, but the script can be run by Cygwin's bash.
    135 
    136 See the [http://svnbook.red-bean.com/en/1.5/svn.reposadmin.create.html#svn.reposadmin.create.hooks section about hooks] in the Subversion book for more information. Other repository types will require different hook setups.
    137 
    138 Git hooks can be used in the same way for explicit syncing of git repositories. Add the following to `.git/hooks/post-commit`:
    139 {{{#!sh
     198See the [http://svnbook.red-bean.com/en/1.7/svn.reposadmin.create.html#svn.reposadmin.create.hooks section about hooks] in the Subversion book for more information. Other repository types will require different hook configuration.
     199
     200==== Git
     201
     202[https://git-scm.com/book/en/v2/Customizing-Git-Git-Hooks Git hooks] can be used in the same way for explicit syncing of Git repositories.
     203
     204If your repository is one that only gets pushed to, add the following to the `hooks/post-receive` file in the repo:
     205{{{#!sh
     206#!/bin/sh
     207tracenv=/path/to/env  # set to your Trac environment's path
     208repos=                # set to your repository's name
     209while read oldrev newrev refname; do
     210    if [ "$oldrev" = 0000000000000000000000000000000000000000 ]; then
     211        git rev-list --reverse "$newrev" --
     212    else
     213        git rev-list --reverse "$newrev" "^$oldrev" --
     214    fi | xargs trac-admin "$tracenv" changeset added "$repos"
     215done
     216}}}
     217The `repos` variable is the repository name (use `"(default)"` for the default repository).
     218
     219Alternatively, if your git repository is one that gets committed to directly on the machine that hosts Trac, add the following to the `hooks/post-commit` file in your Git repository:
     220{{{#!sh
     221#!/bin/sh
     222tracenv=/path/to/env  # set to your Trac environment's path
     223repos=                # set to your repository's name
    140224REV=$(git rev-parse HEAD)
    141 trac-admin /path/to/env changeset added <my-repository> $REV
    142 }}}
     225trac-admin "$tracenv" changeset added "$repos" $REV
     226}}}
     227The `post-commit` hook will do nothing if you only update the repository by pushing to it.
     228
     229Be sure to set the hook scripts as executable.
     230
     231==== Mercurial
    143232
    144233For Mercurial, add the following entries to the `.hgrc` file of each repository accessed by Trac (if [trac:TracMercurial] is installed in a Trac `plugins` directory, download [trac:source:mercurial-plugin/tracext/hg/hooks.py hooks.py] and place it somewhere accessible):
    … …  
    158247}}}
    159248
    160 === Per-request synchronization === #PerRequestSync
    161 If the post-commit hooks are not available, the environment can be set up for per-request synchronization. In that case, the `[trac] repository_sync_per_request` option in [wiki:TracIni#trac-section trac.ini] must be set to a comma-separated list of repository names to be synchronized.
    162 
    163 Note that in this case, the changeset listener extension point is not called, and therefore plugins using it will not work correctly.
    164 
    165 
    166 == Migration from a single-repository setup (Subversion) == #Migration
    167 The following procedure illustrates a typical migration from a Subversion single-repository setup to multiple repositories.
    168 
    169  1. Remove the default repository specification from the `[trac] repository_dir` option.
    170  1. Add the main repository as a named repository.
    171  1. Re-synchronize the main repository.
    172  1. Set up post-commit and post-revprop-change hooks on the "main" repository, and set `[trac] repository_sync_per_request` to an empty value.
    173  1. Add an alias to the main repository as the default repository (by leaving out the the `name`, e.g. `.alias = main`). This ensures that all links predating the migration still resolve to the main repository.
    174  1. Repeat steps 2, 3 and 4 to add other "named" repositories as needed.
    175 
    176 == Migration from a single-repository setup (Mercurial) == #MigrationMercurial
    177 The following procedure illustrates a typical migration from a Mercurial single-repository setup to multiple repositories. Please note that at the time of writing, no initial resynchronization or any hooks are necessary for Mercurial repositories - see [trac:ticket:9485 #9485] for more information.
    178 
    179  1. Upgrade to the latest version of the TracMercurial plugin.
    180  1. Remove the default repository specification from the `[trac] repository_dir` option.
    181  1. Add the main repository as a named repository.
    182  1. Add an alias to the main repository as the default repository (by leaving out the the `name`, e.g. `.alias = main`). This ensures that all links predating the migration still resolve to the main repository.
    183  1. Repeat step 3 to add other "named" repositories as needed.
    184 
    185 == Troubleshooting ==
    186 
    187 === My trac-post-commit-hook doesn't work anymore === #trac-post-commit-hook
    188 
    189 You must now use the optional components from `tracopt.ticket.commit_updater.*`, which you can activate through the Plugins panel in the Administrative part of the web interface, or by directly modifying the [TracIni#components-section "[components]"] section in the trac.ini. Be sure to use [#ExplicitSync explicit synchronization] as explained above.
     249=== Per-request synchronization #PerRequestSync
     250If the post-commit hooks are not available, the environment can be set up for per-request synchronization. The `sync_per_request` attribute for each repository in the database and in [wiki:TracIni#trac-section trac.ini] must be set to `true`.
     251
     252Note that in this case, the changeset listener extension point is not called, and therefore plugins that depend on the changeset added and modified events won't work correctly. For example, automatic changeset references cannot be used with implicit synchronization.
     253
     254== Automatic changeset references in tickets #CommitTicketUpdater
     255
     256You can automatically add a reference to the changeset as a ticket comment whenever changes are committed to the repository. The description of the commit needs to contain one of the following patterns:
     257 * '''`Refs #123`''' - to reference this changeset in `#123` ticket
     258 * '''`Fixes #123`''' - to reference this changeset and close `#123` ticket with the default status ''fixed''
     259
     260This functionality requires installing a post-commit hook as described in [#ExplicitSync explicit synchronization], and enabling the optional commit updater components through the //Plugins// admin panel or by adding the following line to the `[components]` section of your [wiki:TracIni#components-section trac.ini]:
     261{{{#!ini
     262tracopt.ticket.commit_updater.* = enabled
     263}}}
     264For more information, see the documentation of the `CommitTicketUpdater` component in the //Plugins// admin panel and the [trac:CommitTicketUpdater] page.
     265
     266== Troubleshooting
     267
     268=== My trac-post-commit-hook doesn't work anymore #trac-post-commit-hook
     269
     270You must now use the optional components from `tracopt.ticket.commit_updater.*`, which you can activate through the //Plugins// admin page, or by directly modifying the [TracIni#components-section "[components]"] section in the trac.ini. Be sure to use [#ExplicitSync explicit synchronization].
     271
     272See [trac:CommitTicketUpdater#Troubleshooting] for more troubleshooting tips.
     273
     274=== Git control files missing
     275
     276If your repository is not browseable and you find a message in the log that looks like:
     277{{{
     2782017-08-08 10:49:17,339 Trac[PyGIT] ERROR: GIT control files missing in '/path/to/git-repository'
     2792017-08-08 10:49:17,339 Trac[git_fs] ERROR: GitError: GIT control files not found, maybe wrong directory?
     280}}}
     281
     282First check that the path to your repository is correct. If the path is correct, you may have a permission problem whereby the web server cannot access the repository. You can use Git to verify the repository. On a Debian-like Linux OS, the following command should help:
     283{{{#!sh
     284$ sudo -u www-data git --git-dir=/path/to/git-repository fsck
     285}}}
     286
     287On other platforms you may need to modify the command to use the user under which the webserver runs.